
Add to Cart
GX-3020-ZC50 is a standard capacity (500*500*500mm) vacuum chamber with built-in vacuum pump and control system designed for Battery Altitude Simulation Test based on UN38.3 standard (38.3.4.1)
Power | AC220V±10%, 50HZ, 15A 3KW (Available on Request) |
Test Chamber | Inside of chamber: 1. SUS304# 1st grade stainless steel, thickness: 6mm, (function: fire-proof, Anti-corrosion, easy to clean), Explosion-proof 2. Between inner and outer case fill with Super fine aluminum silicate cotton to ensure the inner chamber heating insulation 3. Inner dimension: 500*500*500mm(w*h*d) 4. there is stainless steel shelf (Material: SUS304#) Out of chamber: 1. Material: A3 Cold-roll steel sheet with advanced baking finish(the layer is hard and firm, with strong Rust resistance) 2. Dimension of outside chamber: 800*1500*700mm(w*h*d)
3.Observation Window: 2 layer tempered glass,size: 250*250*5mm, Pasted with explosion-proof membrane. Install with iron gauze between 2 layer tempered glass in case of tested battery explosion splash to injury operator.
4. Equiped with four Universal wheels at bottom of chamber, you can move it to anywhere of Lab
5. Weight: 260kg
|
Pressure Control | 7" PLC touch screen panel to control the pressure and running time automaticlly Pressure Range: 0.5~100kpa (Usually 11.6kpa) Pressure Volatility: ≤5% Pressure maintain: 26hours decrease 5% |
Timing control | Input settings on the PLC interface, freely set in 0-9999H (H/M/S seconds can be shifted) |
Safety Protection | Over-current protection fuse, built-in Pre-overvoltage safety device, use the pressure relief valve to achieve overpressure safety protection |
Alarm function | Operation error or timing end will automatically alarm |
Equipment working condition | Avoid direct sunlight or high temperature and humidity place the equipment on a stable ground Ambient temperature: ( 20 ± 5) ℃ Air source: 0.6~0.8MPA |