Alternative name	Helmet flame retardant tester
Function	Test flame resistance of helmet
Feature	Electric Drive
Weight	135kg
Volume	86×43×80cm
Test standard	EN 397 and ANSI Z89.1-2014

2. Equipment Description:

The tester is used to measuring the flame retardant property of helmet.

Test method:

The test will be processed in the fuming cupboard. The helmet after being tested by high-temperature shock, fixed on the staging in the state of normally wearing.
The side of helmet arm at the flame jet.
Adjust Axis of the jet is parallel with the axis of the helmet, 50mm±1mm up away from edge.
Adjust position of staging, make the tested area 45mm±1mm away from surface of jet.
Then remove staging, open gas control valve to adjust length of flame to 2mm, secure the blue fame 15mm long.
Move the staging on the above certain position, flame fire on the helmet and keep 10s and make power off.
Record burning time and possible burning through phenomenon, exact to 0.1s.

3. Main Characteristics:

The electronic ignition.
Burner automatic timing positioning.
The burning time 0-99.9 seconds (adjustable).
Flame height adjustable, with flame height flame height measurement auxiliary set foot flame height.
The "push-pull frame fixtures.
Highly sensitive combustible gas leak alarm device, such as combustible gas alarm that automatically expires.

4. Technical Parameter:

Model	GX-7006
Frame	firmly clamp helmet, adjustable
Timer	indication error ± 1%, record burning time, accurate to 0.01s ignition timing range 0 -999.9 seconds
Measuring device for flame height	scale high 50mm.
fuel supply devices:	pressure regulator valve, gas valve, gas tank device
box	large enough, secure not being influenced by the wind
Voltage and power	220V ± 10%, 50HZ; 100W
Inner diameter of Bunsen burner	10mm ± 0.10mm
Gas source	methane, propane, butane, liquefied petroleum gas.
Room temperature	-10 °C -30 °C.
relative humidity	≤ 85%.

6. Picture:

Product Tags:

auto fire extinguisher specifcation

flame test equipment

Inquiry Cart 0