
Add to Cart
Hydraulic PLC Integrated Control Battery And Cell 18650 Lab Tester Battery Crush Test Equipment
Battery Crush Test Equipment
Model: GX-5067
Test Requirements: Severe crushing of a cell shall not cause fire or explosion
Test standard:
UN38.3, IEC62133, SAE-J2464
SJ/T11169-1998(equal to UL 1642:1995),SJ/T11170-1998(equal to UL2054:1997),UL 1642[13],GB8897.4—2002, IEC60086-4:2000
Battery testers are the class of instruments designed to assess the condition—the charge, impedance, ripple current, or other measurement—of batteries to ensure they are working as required. Just as batteries have a very wide range of sizes and uses, so do battery testers.
2.Technical Parameter:
Driver | Hydraulic |
Control Method | PLC (7" touch screen) |
Force range | 13KN ± 0.78KN(Maximum of 20KN) |
Force accuracy | 1N; resolution of 1/10000 |
Crush space | 300 × 300× 300mm , 1/3 Teflon tape(resistance to high temperature and corrosion) |
Stroke | 0-300MM |
Structure | All in one structure, Upper is test zone and controller, base is load-bearing and storage |
Door | Automatic opened or closed |
Crush Speed | 0.01~20mm/s |
Crush Plate | Dia.15cm or 20cm circle plate |
Pressure relief vent | Athe back of test chamber, the pressure relief venting opened automaticlly when the pressure is too large or battery explosion |
Communication interface | USB, the data can be ouput |
Delay function | 0~9999(Arbitrary set) |
Material | Interior box:SUS304# stainless steel, |
Power | 380V, 50HZ, 10A |
Weight | 230KG |
Volume of test box | 750*600*1780MM(W*D*H) |
Volume of controller box | 400*400*1150MM |
Optional | Video monitoring system, Temperature, Voltage acquisition system, Fire extinguishing system |
3.Pictures